Design of Hazardous Waste Station in XYZ Port, Jakarta City
DOI:
https://doi.org/10.21776/ub.civense.2020.00302.6Keywords:
Hazardous Waste Station, Design, Port AreaAbstract
The design of the hazardous waste station is intended to adjust the security in the XYZ port area based on the fire and leakage possibility based on hazardous waste generation. The research method uses primary data, which is the measurements to determine the availability of land area, and secondary data to determine the generation amount and solid waste characteristics. The design of the hazardous waste station began with field observations to measure the land availability, then collected secondary data to know the volume type, volume, characteristics, and dimensions of hazardous waste collection. The composition of hazardous wastes based on the solid waste characteristics is flammable (20%), flammable and toxic (56%), toxic (23%), and corrosive (1%). The result found that the recommended dimension of the hazardous waste station is 11m x 8m. The total area of ventilation needed is 8m2. The light source of a hazardous waste station is recommended to have 40 Watts of power and each Armature has 2 lights. The container dimensions for leakage prevention are 2m x 2m x 0.6 m with a freeboard of 0.3 m. The fire extinguisher with a range of 12 mReferences
Te Velde, D. W., & United Nations Conference on Trade and Development. (2006). Foreign direct investment and development: An historical perspective. London: Overseas Development Institute ODI.
I.L.O. (2018). Manajemen Risiko Kebakaran. Jakarta: International Labor Office.
Nugroho, P. A., Prasetya, S., Rozaq, A., & Iswanto, A. (2019). Rancang Bangun Alat Pendeteksi Kebakaran Pada Tempat Penyimpanan Sementara Limbah B3. Seminar Nasional Teknik Mesin, 9(1).
Yudi, S. (2014). Rawannya Pelanggaran Dalam Pengelolaan Limbah Bahan Berbahaya dan Beracun. Lingkar Widyaiswara.
Pemerintah Indonesia. (2014). Peraturan Pemerintah (PP) No.101 Tahun 2014 tentang Pengelolaan Limbah B3
Badan Standarisasi Nasional. (2001). SNI 03-6572-2001 tentang Tata cara perancangan sistem ventilasi dan pengkondisian udara pada bangunan gedung.
NFPA 13. (2013). Standard for the Installation of Sprinkler Systems. Quincy Massachusetts: USA.
Megawati, & Panjaitan, T. W. (2015). Perancangan Proses Penyimpanan Limbah Bahan Berbahaya dan Beracun di PT. ETA Indonesia. Titra.
Menteri Lingkungan Hidup. (2020). Peraturan Menteri Lingkungan Hidup dan Kehutaan No. P.12 tahun 2020 tentang Penyimpanan Limbah Bahan Berbahaya dan Beracun
BAPEDAL. (1995). Keputusan Kepala Bapedal No. 5. Kep-05/BAPEDAL/09/1995 tentang Tata Cara Pemberian Label Dan Symbol Limbah
Wibawa, L. A. (2018). Desain dan Analisis Kekuatan Rangka Tempat Sampah di Balai LAPAN Garut Menggunakan Metode Elemen Hingga. TURBULEN Jurnal Teknik Mesin, 1(2).
Menteri Tenaga Kerja dan Transmigrasi. (1980). Peraturan Menteri Tenaga Kerja dan Transmigrasi No. Per 04/Men/1980 Tentang Syarat-Syarat Pemasangan dan Pemeliharaan Alat Pemadam Api Ringan
Prameswari, S. D., Nurhadi, M. A., Rizaldi, I., Octaviani, M., Suryawan, I. W. K., & Ridhosari, B. (2020). Design Of Hazardous Waste Station In Xyz Radioactive Industry. ENVIROTEK: Jurnal Ilmiah Teknik Lingkungan, 12(1), 80-86.
Suryawan, I. (2014). Evaluasi Pengelolaan Limbah Padat B3 Di Fasilitas Incinerator Untuk Puskesmas Kota Surabaya (Doctoral dissertation, Institut Teknologi Sepuluh Nopember).
Afifi, L. R., Ashari, M. L., & Setiani, V. (2018). Redesain Tempat Penyimpanan Sementara Limbah B3 Pada Industri Asam Phospat di Kabupaten Gresik. Conference Proceeding on Waste Treatment Technology, 1(1), 27-30.
Afiuddin, A. E., & Dwi, A. K. (2018). Studi Perbaikan Tempat Penyimpanan Sementara (TPS) Limbah B3 Sesuai Dengan Limbah Yang Dihasilkan Dan Peraturan Terbaru Di PT. X. IPTEK Journal of Proceedings Series, 2.
Pratiwi, R. W., Setiawan, A., & Afiuddin, A. E. (2017). Perancangan Tempat Penyimpanan Sementara (TPS) Limbah B3. Seminar K3, 1(1), 199-204).
Pramestyawati, T. N. (2019). Pengelolaan Limbah Bahan Berbahaya Dan Beracun (B3) Laboratorium Klinik Di Sumber Limbah. Prosiding Seminar Teknologi Perencanaan, Perancangan, Lingkungan dan Infrastruktur, 1(1), 471-476.
Anggarini, N.H., Megi, S., Prihatiningsih., (2014). Pengelolaan dan Karakterisasi Limbah B3 di PAIR Berdasarkan Potensi Bahaya. Majalah Ilmiah Aplikasi Isotop dan Radiasi, 1 Februari 2014
Menteri Lingkungan Hidup. (2013). Pertatuan Menteri Lingkungan Hidup No.14 Tahun 2013. Tentang Simbol B3.
BAPEDAL. (1995). Keputusan Kepala Badan Pengendalian Dampak Lingkungan No. 01/BAPEDAL/09/1995 tentang Tata Cara dan Persyaratan Teknis Penyimpanan dan Pengumpulan Limbah B3.
Murti, I. W., & Ibrahim, A. H. (2018). Identifikasi Bahaya dan Perancangan Tempat Penyimpanan Sementara (TPS) Limbah B3 Proses Sandblasting Di PT Swadaya Graha. , 8(1). ENERGY, 8(1), 1-7.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2020 Civil and Environmental Science Journal (Civense)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors who publish with this journal agree to the following terms:
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Attribution-NonCommercial 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See the Effect of Open Access).
